FITEL S185HS High Strength Fusion Splicer

Overview

The FITEL S185HS High-end Fusion Splicer is designed for high strength fusion splicing of standard and specialty fibers for factory, manufacturing and R&D applications. The compact but powerful design has been optimized for use in the optical component and optical sensor fields. By targeting the necessary functions in these applications, exceptional performance and a compact design are achieved with this High-end Fusion Splicer.

Key Capabilities

Allows for high strength splicing
Low splice loss
Compact size
High capacity built-in battery (optional)
LCD touch panel provides easy operation
Short fiber cleave length allows use of ultra mini sleeve
Remote control by Wi-Fi communication

Specifications

Applicable fibers *1	SM, MM, DS, NZDS, High-Index, EDF
Cladding diameter	80 to 150 µm
Coating diameter	160 to 2000 µm (In Fiber holder), 160 to 900 µm (Coating clamp splice)
Fiber cleave length	3 to 5 mm (Coating clamp splice), 8 to 11 mm (Cladding clamp splice)
Typical splice loss *2	SM (ITU-T G652): 0.014 dB
Return loss	> 60 dB
Typical splice time *4	15 s (SM by cladding clamp splice)
Tension strength	1.96 N (+0% to +20%)
Protection sleeve length	10 to 60 mm
Typical heat time	35 s (S922: 40 mm sleeve)
Splice programs	Max. 200
Heater programs	Max. 100
Splice data storage	Max. 1000 including 4 images before and after splice
Fiber image magnification on LCD	104X, 278X or 556X
Dimension	210 W x 180 D x 150 H mm
Weight (without battery)	4.5 kg
Monitor	4.3" wide color LCD with touch panel
Data output	USB ver. 2.0 type A: 1 port, USB ver. 2.0 mini B: 1 port
Battery capacity (optional) *5	Typical 60 splice / heat cycles
Operating temperature	0 to 40 °C
Storage temperature	-40 to 60 °C
Humidity	0 to 90% (Non-condensing)
Power source	AC input 100 to 240 V (50/60 Hz)

Fibers should be applied to ITU-T standard. In case of other fibers, depending on the type of fiber, the optimization of splice program may be needed or the splice result may not be satisfied.
These are references. Depending on the environment and condition, the number vary.
This value is references. Depending on the type of fiber and condition of fiber on splicer, the number can vary.
This value can produce using fully charged brand new battery at room temperature 20 degree C. Depending on the condition of the battery and operation environment, the number can vary.

Applications: Fiber splicing

Fiber types: Standard diameter 125µm, Reduced clad <125µm, SMF, MMF

Markets: Medical, Aerospace / Military / Defense, Manufacturing, Sensors

Included in standard package

Fitel S185HS Fusion Splicer, SPL-06-0202

AC adapter with AC power cord
Z stage locks (pr)
Spare electrodes (pr)
Electrode cleaning disc
V-groove cleaning brush
User’s manual
Manufacturer’s 2-year parts and labor warranty
Fiber holders sold separately

Accessories

ACC-06-0200	160 µm Fiber Holders (pr) for S185 (S713S-160)
ACC-06-0201	250 µm Fiber Holders (pr) for S185 (S713S-250)
ACC-06-0213	300 µm Fiber Holders (pr) for S185 (S713S-300)
ACC-06-0202	400 µm Fiber Holders (pr) for S185 (S713S-400)
ACC-06-0212	550 µm Fiber Holders (pr) for S185 (S713S-550)
ACC-06-0203	650 µm Fiber Holders (pr) for S185 (S713S-650)
ACC-06-0204	900 µm Fiber Holders (pr) for S185 (S713S-900)
ACC-06-0205	1300 µm Fiber Holders (pr) for S185 (S713S-1300)
ACC-06-0214	550 µm Coating BW Fiber Holders (pr) for S185 (S713B-550)
ACC-06-0141	S947B Battery for S185
ACC-06-0206	S981A AC Adapter for S185
ACC-06-0207	Hard Carrying Case for S185 (HCC-12)
CON-06-0070	Electrodes for S185 (pr) (ELR-03)